Just opened my KP100 to start construction, while doing inventory, I have found that I am missing Part# E530098 Cap. 220fF ("221") 5% 1Kv Disc 0.2 LS. I have carried on with the construction as far as I could since this is the weekend, and did not figured I could get a part orded till Monday. I have reached the part where the first test are performed though so I have stopped there until I can aquire this Cap. Sigh,, Same thing happen with my K2 just one Cap was missing from it too, when I first built it about 2 years ago. KE5EBSPatrick ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
I went through everything with a "fine tooth comb" and this cap was not in the parts bag, nor had it worked itself out of the bag and into the general box. It is also a rather large cap as disc caps go so not as easy to hide in something.From: [hidden email] Date: Sun, 12 Feb 2012 18:53:50 -0500 Subject: Re: [Elecraft] Missing cap To: [hidden email] You're probably already aware but sometimes missing parts can appear wedged into other parts - on a couple occasions I swore parts were missing but I'd find a tiny cap stuck inside the inside of a knob or something.... On Sun, Feb 12, 2012 at 5:28 PM, Patrick Bourgeois <[hidden email]> wrote: Just opened my KP100 to start construction, while doing inventory, I have found that I am missing Part# E530098 Cap. 220fF ("221") 5% 1Kv Disc 0.2 LS. I have carried on with the construction as far as I could since this is the weekend, and did not figured I could get a part orded till Monday. I have reached the part where the first test are performed though so I have stopped there until I can aquire this Cap. Sigh,, Same thing happen with my K2 just one Cap was missing from it too, when I first built it about 2 years ago. KE5EBSPatrick ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Pat,
If you were aware enough to "not install" the missing capacitor at the C2x location, then you can move on to the following tests except for anything related to 160 meters. OTOH, if you hsd one of the C3x locations blank, you will have to wait until Elecraft ships you a replacement capacitor. 73, Don W3FPR On 2/12/2012 9:53 PM, Patrick Bourgeois wrote: > > I went through everything with a "fine tooth comb" and this cap was not in the parts bag, nor had it worked itself out of the bag and into the general box. It is also a rather large cap as disc caps go so not as easy to hide in something.From: [hidden email] > Date: Sun, 12 Feb 2012 18:53:50 -0500 > Subject: Re: [Elecraft] Missing cap > To: [hidden email] > > You're probably already aware but sometimes missing parts can appear wedged into other parts - on a couple occasions I swore parts were missing but I'd find a tiny cap stuck inside the inside of a knob or something.... > > > > > On Sun, Feb 12, 2012 at 5:28 PM, Patrick Bourgeois<[hidden email]> wrote: > > > > > > > > > > > Just opened my KP100 to start construction, while doing inventory, I have found that I am missing Part# E530098 Cap. 220fF ("221") 5% 1Kv Disc 0.2 LS. I have carried on with the construction as far as I could since this is the weekend, and did not figured I could get a part orded till Monday. I have reached the part where the first test are performed though so I have stopped there until I can aquire this Cap. Sigh,, Same thing happen with my K2 just one Cap was missing from it too, when I first built it about 2 years ago. KE5EBSPatrick > > > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[hidden email] > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
In reply to this post by Patrick Bourgeois
Umm yes as I said I stopped construction until I can aquire this cap so I still have parts just not that part, and yes while is is a small cap even at 1k compaired to most of the others in KP100 it is freaking huge. I have put togeather the K2 and built/repaired several heathkit and other tube rigs this is not my first rodeo. Regards, > From: [hidden email] > To: [hidden email] > Subject: RE: [Elecraft] Missing cap > Date: Sun, 12 Feb 2012 19:01:36 -0800 > > 220 pf is a small cap, even at 1KV. Do you have any leftover parts? > > -----Original Message----- > From: [hidden email] > [mailto:[hidden email]] On Behalf Of Patrick Bourgeois > Sent: Sunday, February 12, 2012 6:53 PM > To: [hidden email]; [hidden email] > Subject: Re: [Elecraft] Missing cap > > > > I went through everything with a "fine tooth comb" and this cap was not in > the parts bag, nor had it worked itself out of the bag and into the general > box. It is also a rather large cap as disc caps go so not as easy to hide > in something.From: [hidden email] > Date: Sun, 12 Feb 2012 18:53:50 -0500 > Subject: Re: [Elecraft] Missing cap > To: [hidden email] > > You're probably already aware but sometimes missing parts can appear wedged > into other parts - on a couple occasions I swore parts were missing but I'd > find a tiny cap stuck inside the inside of a knob or something.... > > > > > On Sun, Feb 12, 2012 at 5:28 PM, Patrick Bourgeois <[hidden email]> > wrote: > > > > > > > > > > > Just opened my KP100 to start construction, while doing inventory, I have > found that I am missing Part# E530098 Cap. 220fF ("221") 5% 1Kv Disc 0.2 LS. > I have carried on with the construction as far as I could since this is the > weekend, and did not figured I could get a part orded till Monday. I have > reached the part where the first test are performed though so I have stopped > there until I can aquire this Cap. Sigh,, Same thing happen with my K2 just > one Cap was missing from it too, when I first built it about 2 years ago. > KE5EBSPatrick > > > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[hidden email] > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
In reply to this post by Don Wilhelm-4
Super Don you come through as usual you are really an asset to this mail list Sir! My thanks, I was looking through the schematic to try and determine that what if any test I could do and you just answered that must faster. It was C2B that I left out there were suppose to be 3 and I had only 2 in my package. Well I will carry on as far as I can go with the test and keep you posted. Cheers! KE5EBS > Date: Sun, 12 Feb 2012 22:13:15 -0500 > From: [hidden email] > To: [hidden email] > CC: [hidden email] > Subject: Re: [Elecraft] Missing cap > > Pat, > > If you were aware enough to "not install" the missing capacitor at the > C2x location, then you can move on to the following tests except for > anything related to 160 meters. OTOH, if you hsd one of the C3x > locations blank, you will have to wait until Elecraft ships you a > replacement capacitor. > > 73, > Don W3FPR > > On 2/12/2012 9:53 PM, Patrick Bourgeois wrote: > > > > I went through everything with a "fine tooth comb" and this cap was not in the parts bag, nor had it worked itself out of the bag and into the general box. It is also a rather large cap as disc caps go so not as easy to hide in something.From: [hidden email] > > Date: Sun, 12 Feb 2012 18:53:50 -0500 > > Subject: Re: [Elecraft] Missing cap > > To: [hidden email] > > > > You're probably already aware but sometimes missing parts can appear wedged into other parts - on a couple occasions I swore parts were missing but I'd find a tiny cap stuck inside the inside of a knob or something.... > > > > > > > > > > On Sun, Feb 12, 2012 at 5:28 PM, Patrick Bourgeois<[hidden email]> wrote: > > > > > > > > > > > > > > > > > > > > > > Just opened my KP100 to start construction, while doing inventory, I have found that I am missing Part# E530098 Cap. 220fF ("221") 5% 1Kv Disc 0.2 LS. I have carried on with the construction as far as I could since this is the weekend, and did not figured I could get a part orded till Monday. I have reached the part where the first test are performed though so I have stopped there until I can aquire this Cap. Sigh,, Same thing happen with my K2 just one Cap was missing from it too, when I first built it about 2 years ago. KE5EBSPatrick > > > > > > > > ______________________________________________________________ > > > > Elecraft mailing list > > > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > > > Help: http://mailman.qth.net/mmfaq.htm > > > > Post: mailto:[hidden email] > > > > > > > > This list hosted by: http://www.qsl.net > > > > Please help support this email list: http://www.qsl.net/donate.html > > > > > > > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[hidden email] > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Free forum by Nabble | Edit this page |