I had the same missing screw problem with my K3 kit and ended up using two
zinc pan head screws to secure the output transistors to the bottom panel.
I also was missing one of the bushings that are used to secure the two fans
for the 100 watt power amplifier.
Missing three non critical parts isn't too bad I guess. I am sure they
strive for 100% accuracy but, stuff happens. I have requested the missing
items from Elecraft.
Mike Scott - AE6WA
Tarzana, CA (DM04 / near LA)
K3-100 #508/ KX1 #1311
From: G4ILO <
[hidden email]>
Subject: Re: [Elecraft] K3/10 For Sale or Trade
To:
[hidden email]
Luther B. Phillips wrote:
>
> Only deviation from instructions was the use
> of 2 zinc pan-head screws to secure the output transistors to the bottom
> panel. (was short two black screws)
>
I did the same when building mine, and so did a couple of other people
judging by a couple of recent posts on the Zerobeat K3 forum. I wonder how
common this is, and whether Elecraft has actually miscalculated the number
of screws required?
-----
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: www.zerobeat.net/smf
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
