N1MM Classic, MH MK2R+ and K3

[Milt -- N5IA]

This is late, but perhaps someone can provide me with a clue.

I loaded a new log for the CQWWSSB and started doing check outs on my
station.  Everything is FB with the exception of the voice playback.

All settings are the same, and have not changed since last using this combo
of N1MM Classic and the MicroHam MK 2R++.  I am using the same .wav files I
used last year for this event.

When the F keys are selected, the transmit works OK and runs for the length
of time of the audio files, whichever one is selected.

However, there is no audio.  The microphone audio is OK through the MK 2R+.

Anyone have any idea of why the audio would not be present from the .wav
files even though the files are being selected and the TX keys for the
length of each file?

Any ideas of what to look for would be appreciated.

Thanks, Milt, N5IA, operator of N7GP



-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4765 / Virus Database: 4040/8448 - Release Date: 10/24/14

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Joe Subich, W4TV-4]

Check the audio switching tab in Router and make sure the correct
sound card (Audio Codec) is selected.  Then make sure you have selected
Speaker (USB Audio CODEC) as the output device in N1MM Logger.

Example configurations for both N1MM Logger (classic) and N1MM Logger+
are available in the MK2R+ section of www.microHAM-USA.com/support.html.

73,

   ... Joe, W4TV


On 2014-10-24 10:28 PM, Milt -- N5IA wrote:

> This is late, but perhaps someone can provide me with a clue.
>
> I loaded a new log for the CQWWSSB and started doing check outs on my
> station.  Everything is FB with the exception of the voice playback.
>
> All settings are the same, and have not changed since last using this
> combo of N1MM Classic and the MicroHam MK 2R++.  I am using the same
> .wav files I used last year for this event.
>
> When the F keys are selected, the transmit works OK and runs for the
> length of time of the audio files, whichever one is selected.
>
> However, there is no audio.  The microphone audio is OK through the MK 2R+.
>
> Anyone have any idea of why the audio would not be present from the .wav
> files even though the files are being selected and the TX keys for the
> length of each file?
>
> Any ideas of what to look for would be appreciated.
>
> Thanks, Milt, N5IA, operator of N7GP
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2014.0.4765 / Virus Database: 4040/8448 - Release Date: 10/24/14
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]