I'm considering trying the CW Reader available in N1MM+ Logger, even though
the K3S has that functionality. My laptop is currently connected to the USB
port on the rig. According to the K3S manual, that should handle all the
necessary communications between the laptop and the rig (I think).
The N1MM documentation does not make reference to a USB connection, only to
using a line out port from the rig to an audio input on the laptop, in my
case that would be a combined microphone/headset jack.
Between the three CW reader engine options discussed in the N1MM
documentation, I think I would go with Fldigi.
I would appreciate any ideas/tips/comments, especially from anyone who has
specifically set up this Logger/rig combination.
As always, thanks in advance!
--
Mike Kopacki NJ2OM
--
Sent from:
http://elecraft.365791.n2.nabble.com/______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
