FYI - At C6APR, for the IOTA test, we had times when the rig would not
unkey after sending either a CW file or a wave file. Upping the K3 and
N1MM Logger baud rate to 38000 from 4800 solved the problems. We were
using two K3s and the stock Elecraft USB cables.
BTW - The K3 is a great DXpediton radio and great for multi transmitter
operations. N1MM Logger was networked and never missed a beat (V9.5.1).
We also handed out QSOs on 6m as C6AQO and on (AFSK) RTTY as C6AXD.
73, Ed
K3IXD
---------------
snipped from a N1MM Logger email:
"Click on the Set button and set speed, etc. to 38400, N, 8, 1 (assuming
the radio is set to 38400 - note that USB-to-serial adapters
paradoxically are more reliable at higher speeds; some of them may not
work as reliably at lower speeds)...."
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
