NR and PF1 key noise

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

NR and PF1 key noise

allenrw1955
Here's another bug that now occurs with v 3.41 and I didn't notice this
before updating.
I assigned the programmable function button "PF1" to switch the
configuration menu item "SPKR+PH", now if I have NR on and I try to
switch the external speaker on and off by holding the "PF1" button I get
a tone that is medium low loudness around .7-1 KHZ.
On some NR settings like "1-1 to 2-4" the tone occurs anytime I switch
the speaker on or off and "3-1" and above it only seems to occur when
switching the speaker on.
This doesn't happen when I switch the speaker from the config menu only
when switching using the "PF1" button.
Pushing other buttons makes it stop.
Almost sounds related to the "3.41 incomplete fix" thread.
Not a big deal but needs to be fixed.
Bob
KB1FRW

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: NR and PF1 key noise

Steve Ellington
Bob
I've always had my PF1 set up like that and always leave my phones plugged
in. I've tried switching with NR on and it works perfectly. There must be
another factor involved.

Steve
N4LQ
[hidden email]
----- Original Message -----
From: "Bob Allen" <[hidden email]>
To: <[hidden email]>; "Elecraft support" <[hidden email]>
Sent: Friday, October 09, 2009 10:58 PM
Subject: [Elecraft] NR and PF1 key noise


> Here's another bug that now occurs with v 3.41 and I didn't notice this
> before updating.
> I assigned the programmable function button "PF1" to switch the
> configuration menu item "SPKR+PH", now if I have NR on and I try to
> switch the external speaker on and off by holding the "PF1" button I get
> a tone that is medium low loudness around .7-1 KHZ.
> On some NR settings like "1-1 to 2-4" the tone occurs anytime I switch
> the speaker on or off and "3-1" and above it only seems to occur when
> switching the speaker on.
> This doesn't happen when I switch the speaker from the config menu only
> when switching using the "PF1" button.
> Pushing other buttons makes it stop.
> Almost sounds related to the "3.41 incomplete fix" thread.
> Not a big deal but needs to be fixed.
> Bob
> KB1FRW
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: NR and PF1 key noise

Rob May-2
In reply to this post by allenrw1955

I have mine set up exactly the same way and I can't reproduce your problem in any mode or at any setting of NR.  F/W 3.41, s/n 1417.
Rob


> Date: Fri, 9 Oct 2009 22:58:05 -0400
> From: [hidden email]
> To: [hidden email]; [hidden email]
> Subject: [Elecraft] NR and PF1 key noise
>
> Here's another bug that now occurs with v 3.41 and I didn't notice this
> before updating.
> I assigned the programmable function button "PF1" to switch the
> configuration menu item "SPKR+PH", now if I have NR on and I try to
> switch the external speaker on and off by holding the "PF1" button I get
> a tone that is medium low loudness around .7-1 KHZ.
> On some NR settings like "1-1 to 2-4" the tone occurs anytime I switch
> the speaker on or off and "3-1" and above it only seems to occur when
> switching the speaker on.
> This doesn't happen when I switch the speaker from the config menu only
> when switching using the "PF1" button.
> Pushing other buttons makes it stop.
> Almost sounds related to the "3.41 incomplete fix" thread.
> Not a big deal but needs to be fixed.
> Bob
> KB1FRW
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
     
_________________________________________________________________
Hotmail: Trusted email with powerful SPAM protection.
http://clk.atdmt.com/GBL/go/177141665/direct/01/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html