Navigator and K3

[Brian F. Wruble-2]

OK, I have my K3/P3 and Navigator correctly hooked up, I think.

I am able to receive digital signals like PSK31, no problem.  I cannot seem
to get any RF output using the Navigator to my P3.  I probably have some
parameter set up wrong.   Any ideas?

Tnx de Brian W3BW


*Brian F. Wruble, C.F.A.

*70 is the new 40.*
*
Mail: 1107 Key Plaza, PMB 447 Key West, FL 33040-4077
Summers: P.O.Box 57, 7400 Augustine Herman Highway, Georgetown, MD 21930
eFax  305.768.0278
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Brian,

Are you using the K3 Line In and Line Out connectors?  If so, the
Navigator must be configured for line level output.
You can check the audio input in TX Test mode - bring up the audio drive
(and the Line In gain) enough to illuminate 4 bars on the ALC meter
(that is NO ALC for the K3).  The 5th bar might flicker a bit and that
indicated the proper level.

73,
Don W3FPR

On 6/1/2013 5:06 PM, Brian F. Wruble wrote:
> OK, I have my K3/P3 and Navigator correctly hooked up, I think.
>
> I am able to receive digital signals like PSK31, no problem.  I cannot seem
> to get any RF output using the Navigator to my P3.  I probably have some
> parameter set up wrong.   Any ideas?
>
> Tnx de Brian W3BW
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html