Lou,
What happens when you put a dummy load on it and attempt to do a TUNE -
what SWR does it report?
If it is still 9.9 or something else above 1.5, then you have a problem
with the K1 tuner - any chance you wound T1 in the direction opposite to
that shown in the manual?
If the dummy load tunes OK, look for an open or a short in your antenna
system.
73,
Don W3FPR
On 7/7/2013 1:22 PM, Lou Roux wrote:
> Hi all,
>
> I just completed a KAT1 for an older K1. The tuner passes all tests
> but won't tune an antenna or a dummy load. When tuning all the relays
> activate but at the end I get the message r 9.9. The MCU is v1.09e.
> I've very carefully gone over all solder connections looking for
> bridges etc. and component placement, everything is in order.
>
> I'm totally frustrated and in need of help! Please contact me offline
> at w6ur at arrl dot net.
>
> Thanks for reading,
>
> Lou - W6UR
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
