Need help with stand for K1

[George Averill]

Elecraft no longer sells the little metal stand for the K1.  Can someone please send me the dimensions of the stand so I can see if I can fabricate one?

72,
George, K4EOR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Dwayne Rohmer]

George,

The stand for the K1 is 5.25" wide, same as the K1, and 4" deep from the
front of the stand to the rear most part.

There are two sets of side brackets that can be installed depending on
preferred height and mounting angle. All side brackets are 3/4" wide.
One set, as mounted on the base, measures 2 11/16" from surface that the
base is resting on up to the hole that is used to mount the K1. The
second set of legs has the mounting hole 4 3/4" above the surface.

73,

Dwayne WV5I


On 3/12/2015 1:04 PM, George Averill wrote:

> Elecraft no longer sells the little metal stand for the K1.  Can someone please send me the dimensions of the stand so I can see if I can fabricate one?
>
> 72,
> George, K4EOR
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]