Hi all,
Our K-Pod control unit can now be used with a K3 or K3/0 that is acting as a remote terminal for a K3 at another location. (This applies equally to the K3S, at either end.)
Here's the applicable release note:
* * *
K3 MCU 5.55
* KPOD WORKS IN REMOTE-RIG TERMINAL MODE: The K-Pod will now function correctly with a K3 or K3/0-mini being used as a remote-rig terminal. Basic functions of the K-Pod can be used, including switch tap / hold and VFO A/B/offset control. LEDs and AUX outputs of the terminal K-Pod are not yet supported. Note: At present, when switches on the terminal K-Pod are used, they will execute macros stored at the remote K3. This will be apparent when macro names are flashed on VFO B.
* * *
If you're interested in testing this new capability, please email me directly.
73,
Wayne
N6KR
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
