Hi all,
I've added an experimental "fast-play" mode to the KX3 to allow play/repeat of message buffers 1, 2, and 3 with a single switch press (1 and 2 in the case of voice modes, which use the built-in digital voice recorder). In this mode, you don't have to tap "MSG" first. The K2 has a similar feature; the K3 doesn't need it since it has 4 dedicated message switches.
Since the normal message-play buttons (1-6) all have primary functions that are heavily used, I selected a different set of switches for fast play: BAND+, BAND-, and FREQ ENT. During contesting, the tap and hold functions of these switches are rarely used once you've selected a band. So they're arguably a good choice for "fast-play."
To enable Fast-Play:
Hold the REC switch for about 3 seconds. This selects Fast-Play mode, displaying the message "FAST PLAY (BAND+/-, FREQ ENT)" as a reminder that the three upper-left switches will instantly play/repeat messages 1, 2, and 3.
To disable Fast-Play:
Hold REC for about 3 seconds again, OR turn power off/on. (Fast-Play mode is not "sticky." A power off/on must cancel it in case the operator gets into it accidentally.)
I expect to have the new firmware ready soon. If you're interested in trying it out, please email me directly. If all goes well it may be posted on our web site as beta later today.
73,
Wayne
N6KR
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
