New Macro in Macro Spreadsheet...

[NK7Z]

Hello,

I have removed the "Split +1" macro, and replaced it with a Split-5
macro.  This now gives both Split +, and Split - macros...

the new Macro is as follows:

BW0001;SWT13;SWT13;FT1;DNB7;RT0;XT0;#SPN000060;#RCF-002500;BW0280;

BW sets bandwidth to as narrow as possible...
SWT is the same a pressing A->B twice
FT1 puts things in split mode
DNB7 is down 5, (really it is)
RT/XT clear XIT, and RIT
SPN sets span to 6 KHz.
RCF- moves the DX frequency to the right side of the P3 display
BW sets the RX bandwidth back to 2.8 KHz.

This is also a slight change from the original macro...  This version
gives a narrow transmit marker, as opposed to the wide one of the early
days...  Adding the BW commands at the start and finish perform this
function.

The change occurred to macro 38 in the spread sheet...

The spread sheet can be downloaded at:
http://nk7z.net/adding-an-external-keypad-to-the-k3/

3/4 of the way down, under the heading "A few hints", is a link to the
spreadsheet.

--
73's, and thanks,
Dave (NK7Z)

For software/hardware reviews see:
http://www.nk7z.net

For MixW support see:
https://groups.yahoo.com/neo/groups/mixw/info

For SSTV help see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]