Well mine arrived this afternoon and are all installed. The good news is
they work!
One observation in the installation - it seems that the process in the
instructions has one install the boards and then connect the cables. I
found it easier to attach the cables and then seat the boards in the
connectors. This is especially true if you have a sub rx and have two synth
cards. One cable (J4 on the sub rx board) is in a connector that is at a 45
degree to the board and is low on the board. After struggling with the
board in place, I pulled it, installed the cable then installed the board -
easy. The same is also true for J84 on the sub rx board.
I'll be very interested to see how the new RX plays in tomorrow's CWT.
Pete, W1RM
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
