Elecraft

New release of Win4K3Suite

Classic

List

Threaded

5 messages Options

tomb18

New release of Win4K3Suite

Hello,
There is a new release of Win4K3Suite for the Elecraft K3-S, KX3, and KX2. This release provides polling performance improvements and fixes an issue with the compression and monitor sliders.

Win4K3Suite is the ultimate computer control and integration program for your Elecraft Radio. It interfaces with all Elecraft hardware allowing even the KX2 to control and integrate the KPA500 and KAT500. In addition, it has built in virtual port technology which allows up to 4 software or hardware devices to share the radio. Integrates with HRD LogBook and DM780, DXLab, Log4OM, you name it! Includes a built in Panadapter supporting LPPAN, and SDRPlay.
You can see an overview here:
https://www.youtube.com/watch?v=htVlc9x0IoU

and some reviews here:
http://www.eham.net/reviews/detail/11214

73 Tom
va2fsq.com

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

ng7m

Re: New release of Win4K3Suite

Tom, this new release with the optimization of the polling for the CAT data
sharing from the K3(s) is a big improvement. Well done. With the new
release the CAT data update in N1MM+ as shared from Win4K3Suite is very
smooth and responsive... I share CAT data to an SDA100 SteppIR controller
and to an SPE 2K-FA. The frequency data updates hit all the devices in
near real-time now through the com port sharing with com0com.

Max NG7M

On Fri, Jul 7, 2017 at 10:06 AM, Tom <[hidden email]> wrote:

> Hello,
> There is a new release of Win4K3Suite for the Elecraft K3-S, KX3, and
> KX2. This release provides polling performance improvements and fixes an
> issue with the compression and monitor sliders.
>
> Win4K3Suite is the ultimate computer control and integration program for
> your Elecraft Radio. It interfaces with all Elecraft hardware allowing
> even the KX2 to control and integrate the KPA500 and KAT500. In addition,
> it has built in virtual port technology which allows up to 4 software or
> hardware devices to share the radio. Integrates with HRD LogBook and
> DM780, DXLab, Log4OM, you name it! Includes a built in Panadapter
> supporting LPPAN, and SDRPlay.
> You can see an overview here:
> https://www.youtube.com/watch?v=htVlc9x0IoU
>
> and some reviews here:
> http://www.eham.net/reviews/detail/11214
>
> 73 Tom
> va2fsq.com
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

--
M. George
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

tomb18

Re: New release of Win4K3Suite

In reply to this post by tomb18

Cool. Just for my info, how are you using the steppir? 73 Tom

Sent from my Samsung Galaxy smartphone.
-------- Original message --------From: "M. George" <[hidden email]> Date: 2017-07-07 9:52 PM (GMT-05:00) To: Tom <[hidden email]> Cc: Elecraft <[hidden email]> Subject: Re: [Elecraft] New release of Win4K3Suite
Tom, this new release with the optimization of the polling for the CAT data sharing from the K3(s) is a big improvement. Well done. With the new release the CAT data update in N1MM+ as shared from Win4K3Suite is very smooth and responsive... I share CAT data to an SDA100 SteppIR controller and to an SPE 2K-FA. The frequency data updates hit all the devices in near real-time now through the com port sharing with com0com.
Max NG7M
On Fri, Jul 7, 2017 at 10:06 AM, Tom <[hidden email]> wrote:
Hello,

There is a new release of Win4K3Suite for the Elecraft K3-S, KX3, and KX2. This release provides polling performance improvements and fixes an issue with the compression and monitor sliders.

Win4K3Suite is the ultimate computer control and integration program for your Elecraft Radio. It interfaces with all Elecraft hardware allowing even the KX2 to control and integrate the KPA500 and KAT500. In addition, it has built in virtual port technology which allows up to 4 software or hardware devices to share the radio. Integrates with HRD LogBook and DM780, DXLab, Log4OM, you name it! Includes a built in Panadapter supporting LPPAN, and SDRPlay.

You can see an overview here:

https://www.youtube.com/watch?v=htVlc9x0IoU

and some reviews here:

http://www.eham.net/reviews/detail/11214

73 Tom

va2fsq.com

---

This email has been checked for viruses by Avast antivirus software.

https://www.avast.com/antivirus

______________________________________________________________

Elecraft mailing list

Home: http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/mmfaq.htm

Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net

Please help support this email list: http://www.qsl.net/donate.html

Message delivered to [hidden email]

--
M. George

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

ng7m

Re: New release of Win4K3Suite

Tom, double checked and I'm feeding the SteppIR SDA100 off the K3s RS232
data out port... On the K3s you have the USB serial interface and when you
are in the USB mode the K3s still has a read only output on the RS323
port. So in the case of the SDA100 and my K3s, I'm not using a com0com
pair to share the CAT feed. I also have a K3 that only has the RS232 I/O
and when I was using it, I had a com0com pair setup to share the output to
the SteppIR in a readonly mode as configured in Win4K3Suite.

At the end of the day right now, it's so easy to get 4 full CAT feeds setup
if required. I can have N1MM++ going along with DXLab Commander and the
full feed to my SPE 2K-FA. Its nice to know I can add more gadgets as
needed to get the K3s CAT feed. I have been tempted to ask you if there
would be potential to add additional port sharing... bump up from 4 ports
to 6 etc... maybe we can take that off the Elecraft list.

Thanks Max NG7M

On Fri, Jul 7, 2017 at 8:19 PM, tomb18 <[hidden email]> wrote:

> Cool.
> Just for my info, how are you using the steppir?
> 73 Tom
>
>
>
> Sent from my Samsung Galaxy smartphone.
>
> -------- Original message --------
> From: "M. George" <[hidden email]>
> Date: 2017-07-07 9:52 PM (GMT-05:00)
> To: Tom <[hidden email]>
> Cc: Elecraft <[hidden email]>
> Subject: Re: [Elecraft] New release of Win4K3Suite
>
> Tom, this new release with the optimization of the polling for the CAT
> data sharing from the K3(s) is a big improvement. Well done. With the new
> release the CAT data update in N1MM+ as shared from Win4K3Suite is very
> smooth and responsive... I share CAT data to an SDA100 SteppIR controller
> and to an SPE 2K-FA. The frequency data updates hit all the devices in
> near real-time now through the com port sharing with com0com.
>
> Max NG7M
>
> On Fri, Jul 7, 2017 at 10:06 AM, Tom <[hidden email]> wrote:
>
>> Hello,
>> There is a new release of Win4K3Suite for the Elecraft K3-S, KX3, and
>> KX2. This release provides polling performance improvements and fixes an
>> issue with the compression and monitor sliders.
>>
>> Win4K3Suite is the ultimate computer control and integration program for
>> your Elecraft Radio. It interfaces with all Elecraft hardware allowing
>> even the KX2 to control and integrate the KPA500 and KAT500. In addition,
>> it has built in virtual port technology which allows up to 4 software or
>> hardware devices to share the radio. Integrates with HRD LogBook and
>> DM780, DXLab, Log4OM, you name it! Includes a built in Panadapter
>> supporting LPPAN, and SDRPlay.
>> You can see an overview here:
>> https://www.youtube.com/watch?v=htVlc9x0IoU
>>
>> and some reviews here:
>> http://www.eham.net/reviews/detail/11214
>>
>> 73 Tom
>> va2fsq.com
>>
>> ---
>> This email has been checked for viruses by Avast antivirus software.
>> https://www.avast.com/antivirus
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
>>
>
>
>
> --
> M. George
>

Charlie T, K3ICH

Re: New release of Win4K3Suite

In reply to this post by tomb18

Since I now have a KX2, but not a KX3, a nice Wind Camp (red) heat sink
specifically made for the KX3 is extra.
It is very well made with a counter sunk mounting holes and bare surface for
the two output transistors.
It has never been installed, so it is officially brand new.
The machining quality is excellent.

I will ship it in the 48 for $35.
Int'l shipping extra.

73, Charlie k3ICH

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Tom
Sent: Friday, July 07, 2017 12:07 PM
To: Elecraft <[hidden email]>
Subject: [Elecraft] New release of Win4K3Suite

Hello,
There is a new release of Win4K3Suite for the Elecraft K3-S, KX3, and KX2.
This release provides polling performance improvements and fixes an issue
with the compression and monitor sliders.

Win4K3Suite is the ultimate computer control and integration program for
your Elecraft Radio. It interfaces with all Elecraft hardware allowing even
the KX2 to control and integrate the KPA500 and KAT500. In addition, it has
built in virtual port technology which allows up to 4 software or hardware
devices to share the radio. Integrates with HRD LogBook and DM780, DXLab,
Log4OM, you name it! Includes a built in Panadapter supporting LPPAN, and
SDRPlay.
You can see an overview here:
https://www.youtube.com/watch?v=htVlc9x0IoU

and some reviews here:
http://www.eham.net/reviews/detail/11214

73 Tom
va2fsq.com

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]