New release of Win4K3Suite

[tomb18]

Hello,
There is a new release of Win4K3Suite for the Elecraft K3-S, KX3, and KX2.  This release provides support for a few firmware changes in the K3 current beta and future release.
In addition, the Noise Reduction control now supports setting the level of noise reduction by right clicking the NR button and selecting one of 32 different levels.  It fun to play around with this control to see the difference it can make.

Win4K3Suite is the ultimate computer control and integration program for your Elecraft Radio.  It interfaces with all Elecraft hardware allowing even the KX2 to control and integrate the KPA500 and KAT500.  In addition, it has built in virtual port technology which allows up to 4 software or hardware devices to share the radio.  It integrates with HRD LogBook and DM780, DXLab, Log4OM, WSJT-X, N1MM+, you name it!

You can see an overview here:
https://www.youtube.com/watch?v=htVlc9x0IoU

and some reviews here:
http://www.eham.net/reviews/detail/11214

Check out how to use the built in Spectrum Scope!

https://youtu.be/bzCjWOjj9ns

73 Tom
va2fsq.com


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Clay Autery-2]

Awesome!!!  Thanks, Tom!  It just keeps getting better and better!

Note...  Once you open the drop-down and a value is highlighted, you can
use the arrow keys to go up and down the list while listening instead of
futzing with the mouse each change...

Right Click on NR, Left click on displayed value, then arrow up or down
one click per setting choice...

Also finally started using the TX EQ presets....  For some reason, my
radio frequently loses my standard setting:
(-16,-16,-16,-12,0,0,+3,+3)  Now that it's in a preset, it'll only take
one click to restore it!

LOVE this software!

73,

______________________
Clay Autery, KY5G
MONTAC Enterprises
[phone]

On 8/4/2017 6:29 PM, Tom wrote:

> Hello,
> There is a new release of Win4K3Suite for the Elecraft K3-S, KX3, and KX2.  This release provides support for a few firmware changes in the K3 current beta and future release.
> In addition, the Noise Reduction control now supports setting the level of noise reduction by right clicking the NR button and selecting one of 32 different levels.  It fun to play around with this control to see the difference it can make.
>
> Win4K3Suite is the ultimate computer control and integration program for your Elecraft Radio.  It interfaces with all Elecraft hardware allowing even the KX2 to control and integrate the KPA500 and KAT500.  In addition, it has built in virtual port technology which allows up to 4 software or hardware devices to share the radio.  It integrates with HRD LogBook and DM780, DXLab, Log4OM, WSJT-X, N1MM+, you name it!
>
> You can see an overview here:
> https://www.youtube.com/watch?v=htVlc9x0IoU
>
> and some reviews here:
> http://www.eham.net/reviews/detail/11214
>
> Check out how to use the built in Spectrum Scope!
>
> https://youtu.be/bzCjWOjj9ns
>
> 73 Tom
> va2fsq.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]