Nice discovery

[Richard Brown]

I discovered a nice thing recently.  The K3 utility software shows the code from the K3 pretty well in the Terminal Mode when connected directly to the K3 but did not do it when connected through the P3.  I fixed that by just shutting the power off on the P3 when listening and the code comes thru great.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Alan Bloom-2]

What version of K3 Utility are you using?  Older versions used the "TT"
command for the terminal window, which is not supported in the P3.
Newer versions use the "TB" command, which is not only supported by the
P3 but should work better in general.

Alan N1AL


On Fri, 2010-12-03 at 10:24 -0800, Richard Brown wrote:
> I discovered a nice thing recently.  The K3 utility software shows the code from the K3 pretty well in the Terminal Mode when connected directly to the K3 but did not do it when connected through the P3.  I fixed that by just shutting the power off on the P3 when listening and the code comes thru great.


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html