No 6m on KPA500

[Ron Leech]

New KPA500 #521 Works 100% except for 6m the KPA500 will not recognize
6m and will not switch bands to 6m and if manually switched will not work
It sees the incoming 40W on the display but that's all  Has any one seen
this before or am I doing something wrong.
Ron Leech   ve7nex
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Phil Salas]

Sounds like the KPA500 Pin11 inhibit input is low on 6-meters.  If you are
using the Elecraft 6-meter preamp and switching it on automatically using
this pin on the K3 accessory port, then you are also disabling the amplifier
on that band.  Pin11 needs to stay high.

Phil - AD5X

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html