Elecraft

No Audio

Classic

List

Threaded

7 messages Options

Robert-3

No Audio

Sorry, I think I am not specific enough.

It's the voice what is not working, since I installed the subreceiver.

As said, I have not changed the settings and tested it with the headset,
but also the hand microphone.

After saving a configuration backup, I did a factory reset, that didn't
solve, even not, when I restored the backup file.

So I wonder now, why isn't the voice working or did I miss something,
that I have forgotten.

PD7RB Robert
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Mark Bayern-3

Re: No Audio

'voice not working'

Ok ... some more questions to help those of us on this list figure out
what you're trying to convey.

First I'll assume we are talking about a K3 or K3s. My next assumption
is that we are talking about a receiver problem and not a transmitter
issue. If either of those are incorrect, let me know.

Does either receiver work? Can you hear any band noise? CW? anything?
(Is the speaker plugged in properly? Does a headset or pair of
earphones work?)

Mark AD5SS

On Mon, Mar 26, 2018 at 10:27 AM, Robert <[hidden email]> wrote:

> Sorry, I think I am not specific enough.
>
> It's the voice what is not working, since I installed the subreceiver.
>
> As said, I have not changed the settings and tested it with the headset,
> but also the hand microphone.
>
> After saving a configuration backup, I did a factory reset, that didn't
> solve, even not, when I restored the backup file.
>
> So I wonder now, why isn't the voice working or did I miss something,
> that I have forgotten.
>
> PD7RB Robert

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Nr4c

Re: No Audio

What do you mean by “voice isn’t working”?

That sounds like a problem for your doctor.

If you mean no TX monitor you may need to turn u the monitor volume.

Did you select the proper mic input jack? What mic, does it need Bias?

Have you consulted the manual?

Sent from my iPhone
...nr4c. bill

> On Mar 26, 2018, at 11:52 AM, Mark Bayern <[hidden email]> wrote:
>
> 'voice not working'
>
> Ok ... some more questions to help those of us on this list figure out
> what you're trying to convey.
>
> First I'll assume we are talking about a K3 or K3s. My next assumption
> is that we are talking about a receiver problem and not a transmitter
> issue. If either of those are incorrect, let me know.
>
> Does either receiver work? Can you hear any band noise? CW? anything?
> (Is the speaker plugged in properly? Does a headset or pair of
> earphones work?)
>
>
> Mark AD5SS
>
>
>
>> On Mon, Mar 26, 2018 at 10:27 AM, Robert <[hidden email]> wrote:
>> Sorry, I think I am not specific enough.
>>
>> It's the voice what is not working, since I installed the subreceiver.
>>
>> As said, I have not changed the settings and tested it with the headset,
>> but also the hand microphone.
>>
>> After saving a configuration backup, I did a factory reset, that didn't
>> solve, even not, when I restored the backup file.
>>
>> So I wonder now, why isn't the voice working or did I miss something,
>> that I have forgotten.
>>
>> PD7RB Robert
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

Bill Frantz

Re: No Audio

In reply to this post by Mark Bayern-3

From Robert's original report:

Radio: K3
He says, "All normal settings are oke, but still no audio,
even not with a
hand microphone.", so I think we can assume he has a problem
with the microphone.

He describes his settings as:

TX is working normal.

= Mic sel : FP.H - high
= Mic level : 20
= CMP level : 20

Things to check:

Is MIC BIAS set correctly (ON for an Elecraft mic)?

Does a microphone plugged into the rear panel jack produce audio?

It is possible there is a bad connection from installing the
second receiver, possibly aligning the multi-pin connectors.

These are the things I can immediately think of.

73 Bill AE6JV

On 3/26/18 at 8:52 AM, [hidden email] (Mark Bayern) wrote:

>'voice not working'
>
>Ok ... some more questions to help those of us on this list figure out
>what you're trying to convey.
>
>First I'll assume we are talking about a K3 or K3s. My next assumption
>is that we are talking about a receiver problem and not a transmitter
>issue. If either of those are incorrect, let me know.
>
>Does either receiver work? Can you hear any band noise? CW? anything?
>(Is the speaker plugged in properly? Does a headset or pair of
>earphones work?)
>
>
>Mark AD5SS
>
>
>
>On Mon, Mar 26, 2018 at 10:27 AM, Robert <[hidden email]> wrote:
>>Sorry, I think I am not specific enough.
>>
>>It's the voice what is not working, since I installed the subreceiver.
>>
>>As said, I have not changed the settings and tested it with the headset,
>>but also the hand microphone.
>>
>>After saving a configuration backup, I did a factory reset, that didn't
>>solve, even not, when I restored the backup file.
>>
>>So I wonder now, why isn't the voice working or did I miss something,
>>that I have forgotten.
>>
>>PD7RB Robert
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to [hidden email]
>

---------------------------------------------------------------------------
Bill Frantz | Re: Computer reliability, performance, and security:
408-356-8506 | The guy who *is* wearing a parachute is
*not* the
www.pwpconsult.com | first to reach the ground. - Terence Kelly

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

John Klewer-2

Re: No Audio

In reply to this post by Nr4c

*What do you mean by “voice isn’t working”? That sounds like a problem for
your doctor.*
A little kindness and grace would go a long way towards keeping the
reflector civil.....

Just sayin'

John

On Mon, Mar 26, 2018 at 9:30 AM, Nr4c <[hidden email]> wrote:

> What do you mean by “voice isn’t working”?
>
> That sounds like a problem for your doctor.
>
> If you mean no TX monitor you may need to turn u the monitor volume.
>
> Did you select the proper mic input jack? What mic, does it need Bias?
>
> Have you consulted the manual?
>
> Sent from my iPhone
> ...nr4c. bill
>
>
> > On Mar 26, 2018, at 11:52 AM, Mark Bayern <[hidden email]> wrote:
> >
> > 'voice not working'
> >
> > Ok ... some more questions to help those of us on this list figure out
> > what you're trying to convey.
> >
> > First I'll assume we are talking about a K3 or K3s. My next assumption
> > is that we are talking about a receiver problem and not a transmitter
> > issue. If either of those are incorrect, let me know.
> >
> > Does either receiver work? Can you hear any band noise? CW? anything?
> > (Is the speaker plugged in properly? Does a headset or pair of
> > earphones work?)
> >
> >
> > Mark AD5SS
> >
> >
> >
> >> On Mon, Mar 26, 2018 at 10:27 AM, Robert <[hidden email]> wrote:
> >> Sorry, I think I am not specific enough.
> >>
> >> It's the voice what is not working, since I installed the subreceiver.
> >>
> >> As said, I have not changed the settings and tested it with the headset,
> >> but also the hand microphone.
> >>
> >> After saving a configuration backup, I did a factory reset, that didn't
> >> solve, even not, when I restored the backup file.
> >>
> >> So I wonder now, why isn't the voice working or did I miss something,
> >> that I have forgotten.
> >>
> >> PD7RB Robert
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:[hidden email]
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to [hidden email]
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

Lyle Johnson

Re: No Audio

In reply to this post by Bill Frantz

When installing the DSP board,it is very easy to mis-align the 5-pin
connector between the front panel board and the DSP board. This
connector carries mic audio from the front panel microphone jack to the DSP.

73,

Lyle KK7P

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Barry Simpson

Re: No Audio

Yes I did exactly what Lyle describes.

I was sure I had not done that when it was suggested to me by Elecraft when
I had the same problem.

But I had !! I corrected it, no harm done and it then worked fine.

Barry VK2BJ

On 27 March 2018 at 03:53, Lyle Johnson <[hidden email]> wrote:

> When installing the DSP board,it is very easy to mis-align the 5-pin
> connector between the front panel board and the DSP board. This connector
> carries mic audio from the front panel microphone jack to the DSP.
>
> 73,
>
> Lyle KK7P
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>