Roger - K8RS
Hi Roger,
You can not, and never could, send FSK when Data is set to Data-A. You need to
HOLD the Data MD button and then select FSK-D, not Data-A. Data-A should be used
for audio based data modes like PSK (if not using PSK-D), SSTV, MFSK...etc.
Don't forget to set your pitch to match what MMTTY is using. Do this with the same
PITCH control you use when in CW mode.
-------------------------
73,
Greg - AB7R
Whidbey Island WA
NA-065
K3#0009 and 0319
On Thu Feb 21 10:56 , "Roger Stimson" sent:
>Group,
> After the recent firmware update I am no longer able to send or receive
RTTY. A few weeks ago I experimented with WriteLog and RTTY with excellent
results. Now I cannot generate any RTTY output nor receive RTTY in Data Mode A.
What is going on? I am using the same setup I used a few weeks ago: FSK input to
pin 1 of the AUX/IN jack along with PTT IN. WriteLog looks like it is generating
the FSK, i.e. the MMTTY display is giving me the two ellipses. Everything seems
normal on CW and SSB.
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
