After you change config menu intem KPA3 to nor;
You have to CYCLE POWER with the front power button (not pull DC) to "set"
the change.
Then watch for ERR 12V when you ask for power above 12W (8W 6m).
If you get ERR 12V, then the circuit breaker or something in that circuit
is open, like burnt pins in the older radios for the DC power to the KPA3.
Keith WE6R
Elecraft K3 Tech.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
