No IF Noise Blanker

[K8DSS]

I very seldom have to use the NB, since I am blessed with a very quiet QTH. However, I turned the NB on today and noticed that the IF blanker says N/A. The main blanker works fine. Any ideas?

Ed - K8DSS

[NW0M]

Ed,

The KNB3 NB has to be enabled from the CONFIG menu.  Just like you did for your KAT3 or KPA3 if you have those modules installed.

73, Mitch

[K8DSS]

Thanks, Mitch. Somehow the KNB-3 was off.

73' Ed - K8DSS