No Luck with CW Messages.

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

No Luck with CW Messages.

Bob DeHaney
Please help, it must be 78-year-old pilot error.

Using the K3 Utility I programmed CW message 1 with a CQ message.
I programed CW message 2 with 5NN. I then saved both messages.

When I tap Message 1 I get a row of dashes and RX EQ 1 displayed.

When I tap Message 2 I get 10db and ATTEN displayed.

I am in CW mode and of course no playback.

Vy 73 de Bob DJ0RD/WU5T


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: No Luck with CW Messages.

k6dgw
Bob,

How old is your K3?  Your description sounds like an occasional problem
I experience ... I tap one key [say PRE], and something else happens. 
I've been told that replacing the pins on the FP connector with gold
plated ones will correct the problem and that Elecraft supplies them
free, but I haven't done it yet.  I've also found that those switches I
use the most stay more reliable than those I rarely use.

Try really TAPPING the Mx switches ... hard.  The switches behind the
panel are not hermetically sealed, and I find that really positive
action on them will correct the problem or at least make it rare.  You
may need to fasten your K3 to the desk with a couple of tabs of
sticky-back velcro to be able to make the switch actions positive enough.

73,

Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County

On 5/9/2018 9:48 AM, Bob DeHaney wrote:

> Please help, it must be 78-year-old pilot error.
>
> Using the K3 Utility I programmed CW message 1 with a CQ message.
> I programed CW message 2 with 5NN. I then saved both messages.
>
> When I tap Message 1 I get a row of dashes and RX EQ 1 displayed.
>
> When I tap Message 2 I get 10db and ATTEN displayed.
>
> I am in CW mode and of course no playback.
>
> Vy 73 de Bob DJ0RD/WU5T
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>
>
> --
> This message has been scanned by E.F.A. Project and is believed to be clean.
>
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]