No Output from K3S on WSJT MSK144
Locked
No Output from K3S on WSJT MSK144
 
|
Was working fine, but today I have no output from the K3S on WSJT MSK144. If I select "Tune" on the WSJT screen and try to adjust the Mic gain control, I can't get any reading on the ALC meter. Any suggestions would be appreciated.
John WA1EAZ |
Re: No Output from K3S on WSJT MSK144
|
|
Check the "Master" level for "Speakers (USB Audio CODEC)" in Windows' Volume Control. If things got changed, perhaps your Windows Sound Settings also got changed. 73, ... Joe, W4TV On 2/9/2017 10:35 AM, John Stengrevics wrote: > Joe, > > Thanks. The MIC SEL did get changed somehow. So, I now set it to LIN IN > > DATA = DATA A > > MIC + LIN = not APPL > > I am connected via a USB cable from my MAC to the K3S. > > The Power Slider on WSJT is set mid-way. > > Now I do get output to drive my amp, but it’s not what it should be. But, still no ability to adjust the ALC level if I select the “Tune” button on WSJT. > > John > WA1EAZ > >> On Feb 9, 2017, at 10:26 AM, Joe Subich, W4TV <[hidden email]> wrote: >> >> >> Are you using DATA and data sub-mode DATA A? >> >> Is MENU:MIC SEL = LIN IN? >> >> Is MENU:MIC + LIN = OFF (or not APPL)? >> >> Have you connected anything to the LINE IN jack? >> >> Has the Soundcard Output changed in WSJT-X? >> >> 73, >> >> ... Joe, W4TV >> >> >> On 2/9/2017 10:10 AM, stengrevics wrote: >>> Was working fine, but today I have no output from the K3S on WSJT MSK144. If >>> I select "Tune" on the WSJT screen and try to adjust the Mic gain control, I >>> can't get any reading on the ALC meter. Any suggestions would be >>> appreciated. >>> >>> John >>> WA1EAZ >>> >>> >>> >>> -- >>> View this message in context: http://elecraft.365791.n2.nabble.com/No-Output-from-K3S-on-WSJT-MSK144-tp7626575.html >>> Sent from the Elecraft mailing list archive at Nabble.com. >>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:[hidden email] >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> Message delivered to [hidden email] <mailto:[hidden email]> > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Re: No Output from K3S on WSJT MSK144
|
|
In reply to this post by stengrevics
John,
Is there any chance you plugged something into the K3S LINE IN jack? Doing so turns off the CODEC audio out and the audio is taken from the LINE IN jack only. If nothing in the LINE IN jack, check the levels for the CODEC in your computer. 73, Don W3FPR On 2/9/2017 10:10 AM, stengrevics wrote: > Was working fine, but today I have no output from the K3S on WSJT MSK144. If > I select "Tune" on the WSJT screen and try to adjust the Mic gain control, I > can't get any reading on the ALC meter. Any suggestions would be > appreciated. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Re: No Output from K3S on WSJT MSK144
|
|
In reply to this post by stengrevics
I am not sure I understand your problem, and therefore my potential solution may be irrelevant.
I experienced sudden extremely low power output recently during a contest. The solution was to re-install the firmware and recalibrate TX power. I later determined the cause was voltage drop coming from the power supply. I fixed loose connections in my power supply and put a short lead from the supply direct to the K3 and things are going well again. Problem fixed at zero cost. From: Elecraft [mailto:[hidden email]] On Behalf Of stengrevics Sent: Thursday, February 9, 2017 7:10 AM To: [hidden email] Subject: [Elecraft] No Output from K3S on WSJT MSK144 Was working fine, but today I have no output from the K3S on WSJT MSK144. If I select "Tune" on the WSJT screen and try to adjust the Mic gain control, I can't get any reading on the ALC meter. Any suggestions would be appreciated. John WA1EAZ -- View this message in context: http://elecraft.365791.n2.nabble.com/No-Output-from-K3S-on-WSJT-MSK144-tp7626575.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email]<mailto:[hidden email]> ________________________________ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Re: No Output from K3S on WSJT MSK144
|
|
In reply to this post by Don Wilhelm
Don,
No, nothing in the LINE IN jack. The audio setting on WSJT did also get changed. I put it back on CODEC. It is working now. I had to set CONFIG > MIC SEL = LINE IN, and increase the power slider on the WSJT screen. Thanks, John WA1EAZ > On Feb 9, 2017, at 12:53 PM, Don Wilhelm <[hidden email]> wrote: > > John, > > Is there any chance you plugged something into the K3S LINE IN jack? Doing so turns off the CODEC audio out and the audio is taken from the LINE IN jack only. > > If nothing in the LINE IN jack, check the levels for the CODEC in your computer. > > 73, > Don W3FPR > > On 2/9/2017 10:10 AM, stengrevics wrote: >> Was working fine, but today I have no output from the K3S on WSJT MSK144. If >> I select "Tune" on the WSJT screen and try to adjust the Mic gain control, I >> can't get any reading on the ALC meter. Any suggestions would be >> appreciated. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Re: No Output from K3S on WSJT MSK144
|
|
In reply to this post by George Thornton
Thanks George,
Turns out it was a matter of settings on both the K3S and the WSJT software. John WA1EAZ > On Feb 9, 2017, at 1:30 PM, George Thornton <[hidden email]> wrote: > > I am not sure I understand your problem, and therefore my potential solution may be irrelevant. > > I experienced sudden extremely low power output recently during a contest. > > The solution was to re-install the firmware and recalibrate TX power. <> > > I later determined the cause was voltage drop coming from the power supply. I fixed loose connections in my power supply and put a short lead from the supply direct to the K3 and things are going well again. > > Problem fixed at zero cost. > From: Elecraft [mailto:[hidden email] <mailto:[hidden email]>] On Behalf Of stengrevics > Sent: Thursday, February 9, 2017 7:10 AM > To: [hidden email] <mailto:[hidden email]> > Subject: [Elecraft] No Output from K3S on WSJT MSK144 > > Was working fine, but today I have no output from the K3S on WSJT MSK144. If > I select "Tune" on the WSJT screen and try to adjust the Mic gain control, I > can't get any reading on the ALC meter. Any suggestions would be > appreciated. > > John > WA1EAZ > > > > -- > View this message in context: http://elecraft.365791.n2.nabble.com/No-Output-from-K3S-on-WSJT-MSK144-tp7626575.html <http://elecraft.365791.n2.nabble.com/No-Output-from-K3S-on-WSJT-MSK144-tp7626575.html> > Sent from the Elecraft mailing list archive at Nabble.com <http://nabble.com/>. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft <http://mailman.qth.net/mailman/listinfo/elecraft> > Help: http://mailman.qth.net/mmfaq.htm <http://mailman.qth.net/mmfaq.htm> > Post: mailto:[hidden email] <mailto:[hidden email]> > > This list hosted by: http://www.qsl.net <http://www.qsl.net/> > Please help support this email list: http://www.qsl.net/donate.html <http://www.qsl.net/donate.html> > Message delivered to [hidden email] <mailto:[hidden email]> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |