No PTT

[K0GFY]

For no particular reason (that I know of) my K3 serial #849 suddenly has no ptt
function.  I have gone into the menu and cannot re-engage the PTT.  I get an
error message of err tfx.  The rig will tune in cw, but no PTT.  What am I doing
wrong?  I'm sure it is painfully obvious.  


 K0GFY R. Hunter Ellington
303-454-0543/720-560-8139
P.O. Box 44
Larkspur, CO 80118



     
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

  Hunter,

The ERR TXF is significant.  If you check the manual, you will find that
message is telling you that you do not have the correct transmit filter
selected.
The easy way is to use K3Utility.  The Transmit filter for CW, Data
modes and SSB must be the 2.7 (2.8) kHz filter.

73,
Don W3FPR

On 1/11/2011 11:25 PM, Hunter Ellington wrote:

> For no particular reason (that I know of) my K3 serial #849 suddenly has no ptt
> function.  I have gone into the menu and cannot re-engage the PTT.  I get an
> error message of err tfx.  The rig will tune in cw, but no PTT.  What am I doing
> wrong?  I'm sure it is painfully obvious.
>
>
>   K0GFY R. Hunter Ellington
> 303-454-0543/720-560-8139
> P.O. Box 44
> Larkspur, CO 80118
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html