No Tx Audio

[Elecraft mailing list]

Problem: Not hearing any audio during transmit in digital modes.I have a K3, Win 10 PC, with microHam DKII interface. When transmitting inRTTY, PSK31 or FT-8 I am not hearing any Tx audio, which I had been previously.  I first noticed this in RTTY when not hearingany diddles. But when using MMTTY – the K3 goes to Tx , I am getting power out and Iam being seen on the RTTY RBN. In PSK31 using WinWabler and FT-8 using WSJT-X, Iam making successful QSO’s. I have gone thru the DK II manual setup pages for theseprograms and cannot find errors in my setup. Not sure if this is a K3 issue or a Windows 10 problem. Anyone have any ideas on what might be wrong? 
73Paulw2eck
 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Bob McGraw - K4TAX]

Check your MON level on your K3.   I run mine about 8 for digital
modes.  I know nothing about the MicroHam DKII.   I just run the USB
interface between the computer running the application software and the
radio.    I only use 3 software applications, WSJT-X, HRD or FLDIGI. 
And with those, I run only one at a time. Logging is handled totally
separate.

73

Bob, K4TAX



On 10/17/2018 1:46 PM, paul ecker via Elecraft wrote:

> Problem: Not hearing any audio during transmit in digital modes.I have a K3, Win 10 PC, with microHam DKII interface. When transmitting inRTTY, PSK31 or FT-8 I am not hearing any Tx audio, which I had been previously.  I first noticed this in RTTY when not hearingany diddles. But when using MMTTY – the K3 goes to Tx , I am getting power out and Iam being seen on the RTTY RBN. In PSK31 using WinWabler and FT-8 using WSJT-X, Iam making successful QSO’s. I have gone thru the DK II manual setup pages for theseprograms and cannot find errors in my setup. Not sure if this is a K3 issue or a Windows 10 problem. Anyone have any ideas on what might be wrong?
> 73Paulw2eck
>  
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Joe Subich, W4TV-4]

 >  Not sure if this is a K3 issue or a Windows 10 problem.

Turn on the K3 Monitor (turn up the level).  Select a Data
mode, *HOLD* the CMP/PWR/MONI encoder in until the VFO B
area of the display shows MONI ## and adjust ## until you
hear the monitor audio while transmitting.

All documented in the Owners Manual ...

73,

    ... Joe, W4TV


On 2018-10-17 2:46 PM, paul ecker via Elecraft wrote:
> Problem: Not hearing any audio during transmit in digital modes.I have a K3, Win 10 PC, with microHam DKII interface. When transmitting inRTTY, PSK31 or FT-8 I am not hearing any Tx audio, which I had been previously.  I first noticed this in RTTY when not hearingany diddles. But when using MMTTY – the K3 goes to Tx , I am getting power out and Iam being seen on the RTTY RBN. In PSK31 using WinWabler and FT-8 using WSJT-X, Iam making successful QSO’s. I have gone thru the DK II manual setup pages for theseprograms and cannot find errors in my setup. Not sure if this is a K3 issue or a Windows 10 problem. Anyone have any ideas on what might be wrong?
> 73Paulw2eck
>  
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Elecraft mailing list]

Joe & Bob - thank you very much, you nailed it. The K3 Monitor, when the K3 was in a digital mode, was at 0. Now  have it turned up to 6 and my problem is solved in all the digital modes I listed. Tnx fer quick response.
73 Paul w2eck
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]