No audio from P5

[Rolf-8]

Hi again from Sweden,

Thanks Don, John, Ken, Robert, Roland & Elvie, Robert and Tom for your
inrerest in my little audio problem. It all started after I have
finished the KDSP2
and was setting L34 for the best signal-to-noise ratio. Before that I
had audio
from the internal speaker as well as from an external. No problems.
Yes I have connected to the right P5, that on the RF board.
Yes the internal speaker cable is OK. Connected to a CD player I have sound
from the internal speaker and from a speaker connected to the external
speaker
jack.
I have re-flowed the solder joints for the headphone jack and I have
about 1.2 mV
at P5 on the RF board. But still no audio from the speaker.

73,
Rolf   SM0YQC

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com