No mikegain
Locked
 
|
Hi, today I have lost the mikegain. The control is set to 30, powerlevel ist set to 50. In a controlreceiver nearby I can only hear a "click". When I switch "Vox ON" Vox is not working, When I turn the "Mon" Level On then there is no Audio comming out of the speaker. Any idea ? 73 de Gerd DJ7VX ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
Gerd,
What radio is this? Monty K2DLJ -----Original Message----- From: Gerd Eggert Sent: Saturday, April 27, 2013 4:09 PM To: [hidden email] Subject: [Elecraft] No mikegain Hi, today I have lost the mikegain. The control is set to 30, powerlevel ist set to 50. In a controlreceiver nearby I can only hear a "click". When I switch "Vox ON" Vox is not working, When I turn the "Mon" Level On then there is no Audio comming out of the speaker. Any idea ? 73 de Gerd DJ7VX ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
Could be a wrong Mic Bias setting.
73, Matt VK2RQ On 28/04/2013, at 6:24 AM, "MontyS" <[hidden email]> wrote: > Gerd, > What radio is this? > Monty K2DLJ > > -----Original Message----- From: Gerd Eggert Sent: Saturday, April 27, 2013 4:09 PM To: [hidden email] Subject: [Elecraft] No mikegain > > Hi, > > today I have lost the mikegain. The control is set to 30, powerlevel ist set to 50. In a controlreceiver nearby I can only hear a "click". When I switch "Vox ON" Vox is not working, When I turn the "Mon" Level On then there is no Audio comming out of the speaker. > > Any idea ? > > 73 de Gerd DJ7VX > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
I think you may be right Matt. Been there, done that.
On Sun, 28 Apr 2013 06:36:09 +1000, Matt VK2RQ <[hidden email]> wrote: >Could be a wrong Mic Bias setting. > >73, Matt VK2RQ > >On 28/04/2013, at 6:24 AM, "MontyS" <[hidden email]> wrote: > >> Gerd, >> What radio is this? >> Monty K2DLJ >> >> -----Original Message----- From: Gerd Eggert Sent: Saturday, April 27, 2013 4:09 PM To: [hidden email] Subject: [Elecraft] No mikegain >> >> Hi, >> >> today I have lost the mikegain. The control is set to 30, powerlevel ist set to 50. In a controlreceiver nearby I can only hear a "click". When I switch "Vox ON" Vox is not working, When I turn the "Mon" Level On then there is no Audio comming out of the speaker. >> >> Any idea ? >> >> 73 de Gerd DJ7VX >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[hidden email] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html Tom Amateur Radio Operator N5GE ARRL Lifetime Member QCWA Lifetime Member ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Amateur Radio Operator N5GE
|
|
|
In reply to this post by Gerd Eggert
Gerd,
You did not say which microphone you are using. An electret microphone needs bias turned on, dynamic microphones do not. Did it work before? If so, what settings may have been changed. Do not overlook the microphone itself. Does it work on another transceiver? Does another microphone work on the K3? If you have a variety of microphones, *most* Kenwood microphones are dynamic type and will work with the K3 (bias off). Elecraft microphones need bias turned on. Other microphones may or may not have the correct mic plug pinout to work with the K3. Heil microphones are a mix of dynamic and electret types, and must have a Kenwood adapter to work with the K3 (all Heil microphones are not the same, one must specify the complete model/type). 73, Don W3FPR On 4/27/2013 4:09 PM, Gerd Eggert wrote: > > Hi, > > today I have lost the mikegain. The control is set to 30, powerlevel > ist set to 50. In a controlreceiver nearby I can only hear a "click". > When I switch "Vox ON" Vox is not working, When I turn the "Mon" Level > On then there is no Audio comming out of the speaker. > > Any idea ? > > 73 de Gerd DJ7VX > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
Kenwood Heil adapter...red band
----- Original Message ----- From: "Don Wilhelm" <[hidden email]> To: "Gerd Eggert" <[hidden email]> Cc: <[hidden email]> Sent: Saturday, April 27, 2013 5:19 PM Subject: Re: [Elecraft] No mikegain > Gerd, > > You did not say which microphone you are using. An electret microphone > needs bias turned on, dynamic microphones do not. > Did it work before? If so, what settings may have been changed. > > Do not overlook the microphone itself. Does it work on another > transceiver? Does another microphone work on the K3? > If you have a variety of microphones, *most* Kenwood microphones are > dynamic type and will work with the K3 (bias off). Elecraft microphones > need bias turned on. Other microphones may or may not have the correct > mic plug pinout to work with the K3. > Heil microphones are a mix of dynamic and electret types, and must have > a Kenwood adapter to work with the K3 (all Heil microphones are not the > same, one must specify the complete model/type). > > 73, > Don W3FPR > > On 4/27/2013 4:09 PM, Gerd Eggert wrote: >> >> Hi, >> >> today I have lost the mikegain. The control is set to 30, powerlevel >> ist set to 50. In a controlreceiver nearby I can only hear a "click". >> When I switch "Vox ON" Vox is not working, When I turn the "Mon" Level >> On then there is no Audio comming out of the speaker. >> >> Any idea ? >> >> 73 de Gerd DJ7VX >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |