Strange problem with my K2/100 on 14 & 18 MHz. Everything is working normally on all bands except on 14 & 18 MHz.
On Friday, I moved the K2/100 up to transverter 2 (903 MHz) to help a fellow ham test out his 903 antenna. My DEM 903 transverter uses a 29 MHz IF and everything was fine. We checked out both CW and SSB on each end. I changed the K2's t-r timing for the CW test. On Saturday, I put the K2/100 back on HF and tried to work a few contesters on 20M. Much to my surprise, I had no output and got the Hi Current message. I tried every other band and everything worked perfectly except on 18 MHz.
I checked the t-r timing and made sure the K2/100 was back on QSK. On 14 MHz SSB the control line is showing ground when I key the mike and on 14 MHz CW I get a sidetone when I key the mike. What has happened? Did I inadvertently press a button or activate some menu item? I am stumped!
Roger K2/100 S/N 3478
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
