Lars,
Sorry, but you did not initially indicate that it was working previously.
My first guess is that your VFO B encoder has failed. You could make a
test by removing the Front Panel and swapping the encoders between A and
B. That step would verify that the problem is in fact the encoder.
73,
Don W3FPR
On 1/5/2013 10:39 AM, Lars Midtboe wrote:
> Yahh but nothing happen when rotating vfo-b....i have this k3 for sverals
> years soo i dont know what happen here??
>
> Any sggestions??
> All buttons are working and i tru reset with shift/power on reloaded older
> fw...nehhh no sesponse..
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html