OK Computer gurus, a little help

[James T. "Jim" Rogers, W4ATK]

        Is there a way to have the audio input (say K2 audio) to the sound card
"loop back" to the output. In other words if I patch the audio from the K2
to the sound card input to use CWGet, I would like to use the audio output
from the sound card to monitor the cw audio. The documentation on the sound
card in my hp zu1175 seems a bit sketchy, and no doubt this may be something
most people do not want to do.
        Hey if that isn't clear, give me a break, I am, after all, sound card
challenged....

Thanks and 73,
Jim W4ATK
K2/100 4028

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[JEAN-FRANCOIS MENARD-2]

Hi,

This is a computer software issue. Audio software normally have an option to
listen what your record or monitor from de line-in of your sound card. But
sometime, software do not offer it....

I have on my computer 2 softwares acting like a spectroscope.... One of them
offer me to listen to the sound that come from the line-in with the
line-out.... from my K2.... And the other one do not offer me the same
option....


-----Message d'origine-----
De : [hidden email]
[mailto:[hidden email]] De la part de James T. "Jim"
Rogers
Envoyé : 27 juillet 2004 08:25
À : Elecraft Reflector
Objet : [Elecraft] OK Computer gurus, a little help


        Is there a way to have the audio input (say K2 audio) to the sound
card "loop back" to the output. In other words if I patch the audio from the
K2 to the sound card input to use CWGet, I would like to use the audio
output from the sound card to monitor the cw audio. The documentation on the
sound card in my hp zu1175 seems a bit sketchy, and no doubt this may be
something most people do not want to do.
        Hey if that isn't clear, give me a break, I am, after all, sound
card challenged....

Thanks and 73,
Jim W4ATK
K2/100 4028

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[James T. "Jim" Rogers, W4ATK]

Thanks guys,
         For all the input. I knew I could depend on you. It just seems my sound
card setup on this laptop does not support that option. I built a little
isolation unit to connect the rig and the pc/sound card and provided for an
external speaker and a set of headphones. It is completely passive, but
works quite well. I included a pot so I regulate the level to the sound
card.

73s de W4ATK
K2/100 #4028

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[JEAN-FRANCOIS MENARD-2]

You did exactly what is to be the best for you....


-----Message d'origine-----
De : [hidden email]
[mailto:[hidden email]] De la part de James T. "Jim"
Rogers
Envoyé : 27 juillet 2004 14:53
À : Elecraft Reflector
Objet : RE: [Elecraft] OK Computer gurus, a little help


Thanks guys,
         For all the input. I knew I could depend on you. It just seems my
sound card setup on this laptop does not support that option. I built a
little isolation unit to connect the rig and the pc/sound card and provided
for an external speaker and a set of headphones. It is completely passive,
but works quite well. I included a pot so I regulate the level to the sound
card.

73s de W4ATK
K2/100 #4028

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[jeff_elecraft]

You can loop the audio back to the output in CWGet. Unfortunately, the time
delay on my computer is significant. I was unable to send CW because of the
delay.

You need to split the audio before it goes into the computer. A simple
y-connector works.

Jeff Burns
AD9T

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of James T. "Jim" Rogers
Sent: Tuesday, July 27, 2004 7:25 AM
To: Elecraft Reflector
Subject: [Elecraft] OK Computer gurus, a little help

        Is there a way to have the audio input (say K2 audio) to the sound
card
"loop back" to the output. In other words if I patch the audio from the K2
to the sound card input to use CWGet, I would like to use the audio output
from the sound card to monitor the cw audio. The documentation on the sound
card in my hp zu1175 seems a bit sketchy, and no doubt this may be something
most people do not want to do.
        Hey if that isn't clear, give me a break, I am, after all, sound
card
challenged....

Thanks and 73,
Jim W4ATK
K2/100 4028

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com