I would take out the 60m option and try again!
Just to rule out that card.
OR??? Is secondary menu for d19 set?
Orientation for d19?
Tom LA1PHA
----- Original Message -----
From: "Ian J Maude" <
[hidden email]>
To: "Elecraft" <
[hidden email]>
Sent: Wednesday, November 10, 2004 10:06 PM
Subject: [Elecraft] OK, I broke it!
> Hi all,
> I fitted the 160m and 60m boards today in my K2 #4044. I decided
> (famous last words) that I should only take the heatsink off once so I
> did both mods together.
> Anyhow, the bands exist and no smoke was let out. However, I set the K2
> to 2 watts, put it into tune and zip. Nothing out. I checked and lo
> and behold, 8v on R31. I cannot alter the VCO voltage. Have I fried
> something or any hints on where to look please.
>
> Cheers
>
> Ian
> --
> Ian Maude G0VGS Morecambe Lancs UK |
[hidden email]
> Sysop of GB7MBC, the Morecambe Bay Cluster
> Running Linux and DXSpider | K2 #4044
>
> Find out about Summits on the Air!
> Visit the SOTA web site at
http://www.sota.org.uk>
> _______________________________________________
> Elecraft mailing list
> Post to:
[hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/subscribers.htm> Elecraft web page:
http://www.elecraft.com>
>
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
