I adjusted the regulator without a load to about 13.80 volts. Over the last 24 hour it rose to 15.5 volts or so. It seem to regulate. I ran my two meter SSB rig and a 100 Watt amp (15+ amp ICAS) last night without issue. I figure the regulation percentages at around 2%...but this morning it rose to 15.5 v with no load. Still regulates.
I will take a look for components that might be a little flaky. Just doesn't make sense to me that a 723 would do this.
Lee
K0WA
In our day and age it seems that Common Sense is in short supply. If you don't have any Common Sense - get some Common Sense and use it. If you can't find any Common Sense, ask for help from somebody who has some Common Sense. Is Common Sense divine?
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
