Ladies and Gents....
I repaired an RS-20A recently. The balancing resistors from the pass transistors had burned up because someone put a 15 amp fuse on the primary side with a load more that 16 to 20 amp on the 13.8 volt side.
Not ever done this before, I made sure the 723 was set at 13.8 volts and then used a 12 volt light as a load. She regulated quite well.
But now, the regulation voltage has increase to 15.5 volts. This happened over a 24 hour period. This does not seem right to me...and I wonder what some of you thing about this.
Lee - K0WA
In our day and age it seems that Common Sense is in short supply. If you don't have any Common Sense - get some Common Sense and use it. If you can't find any Common Sense, ask for help from somebody who has some Common Sense. Is Common Sense divine?
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
