FS: PIC Programmer that has both a 9 pin serial port and USB port on board.
Will program all the current MicroChip PIC's and is upgradable to add new
PIC's as they are brought out.
Original cost in kit form was $49.95 plus $17.95 for the programmer and 40
pin ZIF (zero insertion force) socket and $17.95 for a universal power
supply (Wall Wart) that will put out enough voltage (16-18 volts DC) to
operate the programmer.
The programmer is wired and tested and I'll also include a CD I created
containing the proper software and the manual in PDF format. You can also
download the same from the following website which is where I purchased this
programmer from in the first place --
http://www.electronickits.com/kit/complete/prog/ck1708.htmThe DIY kit software download required for this particular kit is
diypack22.zip and the file will be included on the CD
Total new cost of everything was $85.85 plus $7.50 postage for a total new
cost of $93.95.
I'll sell this one shipped with everything including CD for $75 shipped
anywhere in the US and I'll throw in 3 different PICs (1 each of 16F628020P,
16F628A and a 16C745-I/SP).
Anyone interested, contact me off list -
[hidden email]
First "I'll take it" gets first crack at it.
Jim - W0EB
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
