I have acquired what once was an old, heavy duty, inductively coupled balanced tuner that needs to be completely rebuilt. It looks like it had never been incased, either. The parts can handle some power. I only have 100 watts, but I would like to see how the individual coils perform compared to my Johnson Matchbox with the Anneke Mod.
The 8 plug-in coil units are commercially made, and are stenciled 2 to 18 MC. They are about 11 CM (4.25 in) in diameter and about 14 CM (5.5 in) long. They each have 5 banana plugs about 3.25 CM (1.25 in) apart OC.
FYI- Two of the variable capacitors have 1 CM spacing between the plates, and are about 9 CM (3.5 inches) in diameter, and are about 34 CM (13.5 in) long. There are two other var caps that are smaller, but very nice.
Here is the problem:
The plug-in coil units have banana plugs already described. One became unscrewed on one unit and is missing. The base unit they plug into is stenciled ‘TVL BASE’ and it is missing the center socket that the banana plugs mate with.
I can possibly work around this using an alligator clip, but I would like to get replacement parts if possible. So far, my searches have resulted in nothing even close.
If anyone can help, please contact me off-line. Some of you have been wonderful in the past.
Thanks for tolerating this post,
Rich, n0ce
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
