Elecraft

[OT] Pignology Holiday Sale

Classic

List

Threaded

7 messages Options

Nick Garner-2

[OT] Pignology Holiday Sale

Hello Everyone, Happy Thanksgiving!

Pignology hardware products are all now discounted for the holidays. This
includes, PigRemote, Piglet, and Pigknob.

*Piglet*
A wireless interface to control your rig Android and iOS devices.
http://pignology.net/piglet

*PigRemote*
Similar to Piglet but with streaming audio; leave your radio at home,
control and have bi-directional streaming audio to your handheld device
(Android, iOS, Windows, Mac).
http:/pignology.net/pigremote

*PigKnob*
A tuning knob with 8 built-in macro buttons and a serial bridge so it can
run in-line with your computer.
http://pignology.net/pigknob/

73 and Happy Holidays!

Nick
N3WG
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Bill-3

Re: [OT] Pignology Holiday Sale

I have nothing but good to say about my PigKnob! I can control the audio
gain, modes, bands, auto-notch, and VFO from this amazing little box -
placed at the edge of my desk and handy to me where I sit.

The buttons are programmable to the user's choice (be sure the P3 is
turned off while programming). It is in series with the COM line, so HRD
or whatever will continue working.

For my operation, it is the best addition I have made to my station in
years.

NOTE: I have no dollar interest in Pignology - just want to add my
two-cents worth. The PigKnob is elegant in its simplicity - one of those
few products that actually works as advertised.

Bill W2BLC K-Line

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Jeff Griffin

Re: [OT] Pignology

I would like something that would allow me to, on my K3 key a CQ voice
message on M1,M2, etc, without having to reach for the M# buttons. Something
like the Yaesu FH-2. Does anyone know of anything that will do this.

73 Jeff kb2m

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of W2BLC
Sent: Friday, November 28, 2014 8:43 AM
To: [hidden email]
Subject: Re: [Elecraft] [OT] Pignology Holiday Sale

I have nothing but good to say about my PigKnob! I can control the audio
gain, modes, bands, auto-notch, and VFO from this amazing little box -
placed at the edge of my desk and handy to me where I sit.

The buttons are programmable to the user's choice (be sure the P3 is turned
off while programming). It is in series with the COM line, so HRD or
whatever will continue working.

For my operation, it is the best addition I have made to my station in
years.

NOTE: I have no dollar interest in Pignology - just want to add my two-cents
worth. The PigKnob is elegant in its simplicity - one of those few products
that actually works as advertised.

Bill W2BLC K-Line

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Doug Turnbull

Re: [OT] Pignology

Jeff,
Me too this would be a real bonus! At last there would be a remote pod
to control the K3.

73 Doug EI2CN

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of
[hidden email]
Sent: 28 November 2014 19:19
To: [hidden email]
Subject: Re: [Elecraft] [OT] Pignology

I would like something that would allow me to, on my K3 key a CQ voice
message on M1,M2, etc, without having to reach for the M# buttons. Something
like the Yaesu FH-2. Does anyone know of anything that will do this.

73 Jeff kb2m

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of W2BLC
Sent: Friday, November 28, 2014 8:43 AM
To: [hidden email]
Subject: Re: [Elecraft] [OT] Pignology Holiday Sale

I have nothing but good to say about my PigKnob! I can control the audio
gain, modes, bands, auto-notch, and VFO from this amazing little box -
placed at the edge of my desk and handy to me where I sit.

The buttons are programmable to the user's choice (be sure the P3 is turned
off while programming). It is in series with the COM line, so HRD or
whatever will continue working.

For my operation, it is the best addition I have made to my station in
years.

NOTE: I have no dollar interest in Pignology - just want to add my two-cents
worth. The PigKnob is elegant in its simplicity - one of those few products
that actually works as advertised.

Bill W2BLC K-Line

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

N7US

Re: [OT] Pignology

You can do that with the logging programs that I use: DXLab's WinWarbler,
N1MM, N1MM+, and Writelog.

73, Jim N7US

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of Doug
Turnbull
Sent: November 28, 2014 14:45
To: [hidden email]; [hidden email]
Subject: Re: [Elecraft] [OT] Pignology

Jeff,
Me too this would be a real bonus! At last there would be a remote pod
to control the K3.

73 Doug EI2CN

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of
[hidden email]
Sent: 28 November 2014 19:19
To: [hidden email]
Subject: Re: [Elecraft] [OT] Pignology

I would like something that would allow me to, on my K3 key a CQ voice
message on M1,M2, etc, without having to reach for the M# buttons. Something
like the Yaesu FH-2. Does anyone know of anything that will do this.

73 Jeff kb2m

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

k6dgw

Re: [OT] Pignology

In reply to this post by Doug Turnbull

I "key" the M1-M4 memories from N1MM by putting the CATASC1: N1MM
commands in the function key slots and using them to emulate switch
taps. Don't see why you can't program your Pigknob switches to do the
same thing [don't need the CATASC1: part of course].

73,

Fred K6DGW
- Northern California Contest Club
- CU in the 50th Running of the Cal QSO Party 3-4 Oct 2015
- www.cqp.org

On 11/28/2014 12:44 PM, Doug Turnbull wrote:

> Jeff,
> Me too this would be a real bonus! At last there would be a remote pod
> to control the K3.
>
> 73 Doug EI2CN
>
> -----Original Message-----
> From: Elecraft [mailto:[hidden email]] On Behalf Of
> [hidden email]
> Sent: 28 November 2014 19:19
> To: [hidden email]
> Subject: Re: [Elecraft] [OT] Pignology
>
> I would like something that would allow me to, on my K3 key a CQ voice
> message on M1,M2, etc, without having to reach for the M# buttons. Something
> like the Yaesu FH-2. Does anyone know of anything that will do this.
>
> 73 Jeff kb2m

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Julio César García Mahillo

Re: [OT] Pignology

In reply to this post by Doug Turnbull

Hi all,

I quite agree with you.

Pignology products are really good.

I have Piglet and Pigknob .
They offer a high standard of quality and provide you an easy and comfortable operating .

They are easy to use and configurate.
They are a good option when you are in the field or coast, with activations, and you do not want your radio equipment to get dust or harm! I carry them with me most of time.

I can say they have become in an essential element for my activations.

On the other hand, they are just small boxes that you can carry in any pocket of your radio bag. They occupy quite little space.

At home they are also quite useful because you can operate from any place, on sofa , in chair...

I do recommend these products.

As you, I just wanted to express my experience and opinion, no dollar interest at all

Julio

EB1BSV

> El 28/11/2014, a las 21:44, Doug Turnbull <[hidden email]> escribió:
>
> Jeff,
> Me too this would be a real bonus! At last there would be a remote pod
> to control the K3.
>
> 73 Doug EI2CN
>
> -----Original Message-----
> From: Elecraft [mailto:[hidden email]] On Behalf Of
> [hidden email]
> Sent: 28 November 2014 19:19
> To: [hidden email]
> Subject: Re: [Elecraft] [OT] Pignology
>
> I would like something that would allow me to, on my K3 key a CQ voice
> message on M1,M2, etc, without having to reach for the M# buttons. Something
> like the Yaesu FH-2. Does anyone know of anything that will do this.
>
> 73 Jeff kb2m
>
> -----Original Message-----
> From: Elecraft [mailto:[hidden email]] On Behalf Of W2BLC
> Sent: Friday, November 28, 2014 8:43 AM
> To: [hidden email]
> Subject: Re: [Elecraft] [OT] Pignology Holiday Sale
>
> I have nothing but good to say about my PigKnob! I can control the audio
> gain, modes, bands, auto-notch, and VFO from this amazing little box -
> placed at the edge of my desk and handy to me where I sit.
>
> The buttons are programmable to the user's choice (be sure the P3 is turned
> off while programming). It is in series with the COM line, so HRD or
> whatever will continue working.
>
> For my operation, it is the best addition I have made to my station in
> years.
>
> NOTE: I have no dollar interest in Pignology - just want to add my two-cents
> worth. The PigKnob is elegant in its simplicity - one of those few products
> that actually works as advertised.
>
> Bill W2BLC K-Line
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]