OT: Receiver or converter for VLF reception?

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

OT: Receiver or converter for VLF reception?

Jim Low man
Wayne has stated that, even with the new synthesizer board(s), receiver
sensitivity drops off as we go lower in frequency.

If any of you are receiving the VHF portion of the spectrum, what type
of receiver or receiving converter are you using?

That is, short of a $3,000+ communications-grade receiver?

Thanks for any advice and 73 de Jim - AD6CW
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: OT: Receiver or converter for VLF reception?

Jim AB3CV
With the increase in atmospheric noise as the frequency goes lower even in
a quiet rural setting I suspect the new proposed mods will be sufficient.
Note that both bands are pretty narrow best served by narrow modes the
widest of which will likely be CW. PSK31, PSK64, JT65 or the newer JT9
would fit nicely. The increased processing gain of the JT modes would also
help with the really weak signals expected of transcontinental or
transoceanic sources.

I'm planning to get on with just the K3 and whatever mods are available and
hoping that along with some firmware upgrades someone (Elecraft?) comes up
with an amp which can come off the transverter TX out. If I have to build
one myself I'd probably skip the linear stuff (PSK) and just go with an
easier to build nonlinear one for CW and JT modes.

jim ab3cv

On Sun, May 3, 2015 at 3:24 PM, Jim Lowman <[hidden email]> wrote:

> Wayne has stated that, even with the new synthesizer board(s), receiver
> sensitivity drops off as we go lower in frequency.
>
> If any of you are receiving the VHF portion of the spectrum, what type of
> receiver or receiving converter are you using?
>
> That is, short of a $3,000+ communications-grade receiver?
>
> Thanks for any advice and 73 de Jim - AD6CW
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]