J F wrote:
> Sorry about the space, but I know a few folks had the
> TT Corsair (not II) before getting an Elecraft.
>
> A friend has a problem with his rig. I suspect it is a
> VFO/PTO problem. The last four digits on every band
> jump all over the place, form the sounds of the audio,
> the rig is running all over the frequency range of the
> VFO/PTO. He doesn't have schematics for the rig, but I
> would suspect either a bad voltage regulator or
> clock/oscillator. Any help?
The Corsair PTO, like that of many of the older the Tentec rigs, is
greased with some form of pig fat (not really) which gets hard after a
few years and needs to be replaced. Although you will hear otherwise,
the only correct way to do this is to remove the PTO, disassemble it,
clean the parts, regrease, and reassemble. Tentec sells a kit to do
this for $25 which includes all the parts which can wear, the correct
grease, and instructions.
I am currently in the process of doing this to an Argonaut and I've done
a Corsair in the past. It looks scary but is actually not so hard with
the instructions (you *do* need the instructions).
Good luck.
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
