I just downloaded and installed CW Skimmer on my computer. It is a really nice
program. It easily decodes weak signals and it is obvious an awful lot of work
went into it. The program supports the K3. As a casual CW op I am very
impressed.
On another note, I just installed the KXV3 in my K3 #106 and it all went without a
hitch. I would recommend installing it on the initial build since there is an awful
lot of work/disassembly doing a retrofit.
I feed the 8215khz IF out into the RX jack on my PRO3 and have a very
effective, though expensive, spectrum scope. Have to get a good isolated switch
to switch between the IF out and RX antenna out on the K3 to the PRO3.
I am using the MicroHam Microkeyer for FSK and keyboard CW with the K3.
One last note is that I use the W2IHY Iplus to do all my switching of mic's, amps
speakers among 3 radios. It works great on isolation and no rf problems.
I have the W2IHY 8 band equalizer but must say I do not use it with K3.
I find the built in equalizer to be just as good, if not better, since it was designed
for the radio.
Mike WA8EBM
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
