My KPA1500 is "sniffing" the frequency that is being sent by the
TS990 to my logging program.
I was working split on 40M, TXing on the TS990 Sub Frequency
and RXing on the TS990 Main frequency. All worked well.
After the QSO I switched the TS990 Main frequency to 20M to listen
around. The Main is still selected RX and the Sub still selected for
TX. I heard the KPA1500 going click click click ..;, looked over and
saw it going back and forth between 20M and 40M; it couldn't decide
which band to be on. I would have expected the KP1500 to go to the TX
band and stay there.
I will try turning off the logging program, add a wire to the XVR
connector for TXD, and set the KP1500 to poll the TS990 and see what
happens then.
- Paul
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
