Apologies for the off topic post, but thought someone on the reflector with more technical savvy than me could point me in the right direction. I've tried the FT1000mp reflector, but was no help.
My FT1000mp failed on me at the weekend, that 18 and 21mHz bands have gone deaf and I have no output power. The problem is sporadic, and the rig seems Ok, when I turn it on cold, but after 20-30 minutes I lose these bands. The radio goes deaf (+no tx pwr) between 14.500 and 21.999, and these frequencies correspond to a band change relay clicking in, so I assume there is maybe a fault with either a relay or possibly something in the LPF network corresponding to this frequency range.
I'm looking at putting it into a shop for repair, but if it is simply a matter of replacing a relay etc, I'd prefer to have a go myself.
If anyone is familiar with the radio, and has some ideas, please e-mail off reflector..
"To get back on topic, I had a listen in the EQP at the weekend between operation in the Commonwealth Contest. The only station heard was KD5OMS (from memory), calling on 40m, but he had stopped by the time I had connected up the K2"
Regards all and apologies again for the off topic post
David, Vk2NU
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
