Gil,
I assume you are using this preamp with the K3 equipped with the KXV3 or
KXV3A.
Take a look at the rendering on page 3 of the PR-6 manual, and make it
look just like that.
Whatever is currently connected to your RX ANT IN and OUT jacks is
removed and the PR-6 connects to those jacks using BNC Male to Male
connectors. Then plug whatever you had on the RX ANT IN/OUT jacks onto
the PR-6 bypass jacks.
73,
Don W3FPR
Gil WA5YKK wrote:
> Appealing to the experts;
>
> With foggy head, I'm trying to get the idea of what coax connection
> goes where on the 6 meter preamp module. I gather that the 6 meter
> antenna is connected to J3, then obviously the BNC connections on the
> other side go to the matching connectors on the K3, but the text is
> fuzzy after that - I don't register what goes to J1.
> Could those whom have mastered this one item give me a hint? (The
> Elecraft text has too many speed bumps in it that lead me nowhere, for
> some reason!)
>
> Thanks, 73's
> Gil WA5YKK
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html