Operational procedure question

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

Operational procedure question

Orville
Yesterday, while attempting to work E3ØFB on RTTY, I ran into a mode
operational problem with my K3. E3ØFB was operating in split mode and was
transmitting in REV RTTY and receiving in Normal RTTY.

While I was operating in FSK D in split mode, the only way I found to toggle
between Normal and Reverse was by depressing and holding the Mode switch as
I went from Receive to Transmit. I was unable to go from Normal to REV by
setting the A and B vfo’s when switching from Rx to TX. Is there a way to
set the REV/Normal to follow the particular vfo in use at the time.

Thanks

Orville, K5VWW

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Operational procedure question

Mike Harris-9
I was using AFSK MMTTY and simply toggled the "Normal/Reverse" button.
Worked for me, one of the few who made it.  I assume this would also
work if using FSK, never tried it.

Regards,

Mike VP8NO

On 08/03/2015 21:02, Orville wrote:

> Yesterday, while attempting to work E3ØFB on RTTY, I ran into a mode
> operational problem with my K3. E3ØFB was operating in split mode and was
> transmitting in REV RTTY and receiving in Normal RTTY.
>
> While I was operating in FSK D in split mode, the only way I found to toggle
> between Normal and Reverse was by depressing and holding the Mode switch as
> I went from Receive to Transmit. I was unable to go from Normal to REV by
> setting the A and B vfo’s when switching from Rx to TX. Is there a way to
> set the REV/Normal to follow the particular vfo in use at the time.
>
> Thanks
>
> Orville, K5VWW
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]