If you intend to eventually build a k2/100 I would do the SSB option first. I would do the noise blanker last. I would do the KAT2 only if I intend to go portable or as a main QRP rig. Otherwise would use the KAT100 or other tuner.
You cant do both DSP and Audio Filter at the same time as they occupy the same slot. For mostly CW op the audio filter is good enough most say but others may beg to differ.
This sequence allows you to do side and and Psk off the rip. You can then decide how to operate the K2 later
Ariel NY4G
Sent from my iPhone
On Feb 20, 2012, at 1:34 AM, "Earl Richardet" <
[hidden email]> wrote:
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html