> I have set it up in what I believe to be a correct manner, with the
> radio set to Yaesu, the interface as RS-232 and the baud rate to
> 9600.
If you are using a serial connection, set the Bandmaster for *KENWOOD*.
The Elecraft protocol is nearly identical to that of Kenwood. In fact,
I often test Kenwood configurations for the microHAM product using my
K3.
73,
... Joe, W4TV
On 2018-12-25 4:19 PM, JAMES H FITZPATRICK via Elecraft wrote:
> I have recently come into possession of an Array Solutions Bandmaster,
> the *original* edition. I have set it up in what I believe to be a
> correct manner, with the radio set to Yaesu, the interface as RS-232 and
> the baud rate to 9600. The radio baud rate is set correctly to 9600
> also. In turning the unit on the Bandmaster immediately jumps to the 15m
> antenna position and stays there regardless of which band I have the
> radio on. The unit passes through the band data to my microHam CW Keyer
> box and hence to my computer logging program correctly. The logging
> computer follows correctly when I change bands on the radio. Obviously
> I'm missing something here, but I can't figure out what. Any hints?
>
> Thanks.
>
> Jim WI9WI
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
