Assumption: you're talking about the Elecraft XV-50
The XV outputs 20W independent of the drive configuration. It can be
driven with as little as 1mw of 28Mhz power. Assuming you use a K60XV,
the existence of the 100W bit doesn't matter .. without K60XV you
would use the original output connector, see the XV series manuals for
more info.
de w1rt/john
On 3/10/06, Dr. Werner Furlan <
[hidden email]> wrote:
> please forgive my uneducated question:
> is there a difference when a 6m converter is connected to a K2 or to a
> K2/100? what is the output on 6m for both of them or the other way round,
> does a K2/100 + Transverter provide 100 W on 6m?
>
> 73! de Werner
> OE9FWV
>
> --
> You have to stay in shape. My grandmother started
> walking five miles a day when she was 60. She's 97
> today and we don't know where she is.
>
>
>
> PGP-Key: <
http://www.qsl.net/oe9fwv/furlan.asc>
> Fone +43 5522 75013
> Fax +43 820 555 85 2621
> Mobile +43 664 6340014
> K2 #5203
> _______________________________________________
> Elecraft mailing list
> Post to:
[hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>
http://mailman.qth.net/mailman/listinfo/elecraft>
> Help:
http://mailman.qth.net/subscribers.htm> Elecraft web page:
http://www.elecraft.com>
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com