P3 Beta SVGA Inop
Locked
 
|
Decided to try the latest beta P3 firmware. All loaded including FPGA.
SVGA output is frozen and P3 is updating very slowly. When I turn the SVGA display enable off the P3 behaves "normally" with a proper update rate. I've removed power from the P3 completely and restarted it with no improvement. Is there something else I need to do? It was working well before this. jim ab3cv ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
CONTENTS DELETED
The author has deleted this message.
|
|
|
I reloaded the current non-beta version. Not having P3 working is not worth
playing with betas. jim ab3cv On Tue, Feb 3, 2015 at 1:52 AM, Gerald Manthey <[hidden email]> wrote: > I could not use the latest beta either. I had to go one beta back. > Gerald KC6CNN > On Feb 2, 2015 7:46 PM, "Jim Miller" <[hidden email]> wrote: > >> Decided to try the latest beta P3 firmware. All loaded including FPGA. >> >> SVGA output is frozen and P3 is updating very slowly. >> >> When I turn the SVGA display enable off the P3 behaves "normally" with a >> proper update rate. >> >> I've removed power from the P3 completely and restarted it with no >> improvement. >> >> Is there something else I need to do? >> >> It was working well before this. >> >> jim ab3cv >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [hidden email] >> > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
No doubt this is being carefully read by Elecraft! I just want to add my
'bug' that the NB setting is not 'sticky' on the external display. Otherwise, for me at least, the latest beta appears to do its job. Clearly, YMMV! 73 Stephen G4SJP On 3 February 2015 at 13:19, Jim Miller <[hidden email]> wrote: > I reloaded the current non-beta version. Not having P3 working is not worth > playing with betas. > > jim ab3cv > > On Tue, Feb 3, 2015 at 1:52 AM, Gerald Manthey <[hidden email]> wrote: > > > I could not use the latest beta either. I had to go one beta back. > > Gerald KC6CNN > > On Feb 2, 2015 7:46 PM, "Jim Miller" <[hidden email]> wrote: > > > >> Decided to try the latest beta P3 firmware. All loaded including FPGA. > >> > >> SVGA output is frozen and P3 is updating very slowly. > >> > >> When I turn the SVGA display enable off the P3 behaves "normally" with a > >> proper update rate. > >> > >> I've removed power from the P3 completely and restarted it with no > >> improvement. > >> > >> Is there something else I need to do? > >> > >> It was working well before this. > >> > >> jim ab3cv > >> ______________________________________________________________ > >> Elecraft mailing list > >> Home: http://mailman.qth.net/mailman/listinfo/elecraft > >> Help: http://mailman.qth.net/mmfaq.htm > >> Post: mailto:[hidden email] > >> > >> This list hosted by: http://www.qsl.net > >> Please help support this email list: http://www.qsl.net/donate.html > >> Message delivered to [hidden email] > >> > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
Here is my input, for some reason I cannot use build in RTTY TX, going back to 129/016 bring back my TX RTTY. Same with any mode CW/PSK no TX with build-in client...I am missing something or bug?
vy 73 de VE3GNO Daniel From: Stephen Prior <[hidden email]> To: Elecraft Reflector <[hidden email]> Sent: Tuesday, February 3, 2015 8:28 AM Subject: Re: [Elecraft] P3 Beta SVGA Inop No doubt this is being carefully read by Elecraft! I just want to add my 'bug' that the NB setting is not 'sticky' on the external display. Otherwise, for me at least, the latest beta appears to do its job. Clearly, YMMV! 73 Stephen G4SJP On 3 February 2015 at 13:19, Jim Miller <[hidden email]> wrote: > I reloaded the current non-beta version. Not having P3 working is not worth > playing with betas. > > jim ab3cv > > On Tue, Feb 3, 2015 at 1:52 AM, Gerald Manthey <[hidden email]> wrote: > > > I could not use the latest beta either. I had to go one beta back. > > Gerald KC6CNN > > On Feb 2, 2015 7:46 PM, "Jim Miller" <[hidden email]> wrote: > > > >> Decided to try the latest beta P3 firmware. All loaded including FPGA. > >> > >> SVGA output is frozen and P3 is updating very slowly. > >> > >> When I turn the SVGA display enable off the P3 behaves "normally" with a > >> proper update rate. > >> > >> I've removed power from the P3 completely and restarted it with no > >> improvement. > >> > >> Is there something else I need to do? > >> > >> It was working well before this. > >> > >> jim ab3cv > >> ______________________________________________________________ > >> Elecraft mailing list > >> Home: http://mailman.qth.net/mailman/listinfo/elecraft > >> Help: http://mailman.qth.net/mmfaq.htm > >> Post: mailto:[hidden email] > >> > >> This list hosted by: http://www.qsl.net > >> Please help support this email list: http://www.qsl.net/donate.html > >> Message delivered to [hidden email] > >> > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |