I operated on 6M with my K3/P3 combo several hours this W/E, and
didn't experience any birdies or a drifting wide band one. I was
also using the PR6 preamp.
Could it possibly be that the installation of the sub-rcvr, KXR3, be
causing some K3 instabilities, by its physical proximity over the RF
board ? This could happen whether it was off or on.
I just received a KXR3 kit, and after I install it, I'll check for
those birdies.
I have quite a high power line noise level, to my NE, that I think is
coming from a pole/xfrmr about 600' away.
I used both a IC-756PII and the K3 on 6M yesterday, and the K3's NB,
when properly adjusted, was noticeably better than the ICOM's. in
reducing this interference. The P3 was also more sensitive for weak
signals than the PII's display.
Chuck, W7CS
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
