P3 Center Frequency

[Hank Garretson]

I have K3 M1 and M2 programmed to QSY up and down 5 kHz (for use during
North American Sprints).  K22;DN7 and K22;UP7.

Moves K3 frequency up or down 5 kHz.  But ...

P3 Center Frequency, both Tracking and Fixed Mode, does not change.  With a
slight movement of VFO knob, P3 Center frequency jumps to the correct
frequency.

Any hints on how to fix this?

K3 MCU 4.25, DSP1 2.71, FPF 1.14.  P3 MCU 1.00.


Ski Exuberantly,

Hank, W6SX

Mammoth Lakes, California

Elevation 8083 feet in John Muir's Range of Light
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Alan Bloom-2]

Hi Hank,

You're right.  This will require a K3 firmware change to fix.  I'll ask
Wayne to add it to his bug list.

Thanks,

Alan N1AL


On Thu, 2011-01-20 at 12:15 -0800, Hank Garretson wrote:

> I have K3 M1 and M2 programmed to QSY up and down 5 kHz (for use during
> North American Sprints).  K22;DN7 and K22;UP7.
>
> Moves K3 frequency up or down 5 kHz.  But ...
>
> P3 Center Frequency, both Tracking and Fixed Mode, does not change.  With a
> slight movement of VFO knob, P3 Center frequency jumps to the correct
> frequency.
>
> Any hints on how to fix this?
>
> K3 MCU 4.25, DSP1 2.71, FPF 1.14.  P3 MCU 1.00.
>
>
> Ski Exuberantly,
>
> Hank, W6SX
>
> Mammoth Lakes, California
>
> Elevation 8083 feet in John Muir's Range of Light

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html