P3 - Center/Top Spectrum Frequency Stays Zero?

[w4sc-2]

I had this issue also.  The “0” reading appeared after making and saving a couple of screen captures.  Recycling the power on the P3 did not correct.  Closing the “COMM PORT” and reopening did correct it.  I have had other issues with this connection to the P3 through the K3S USB connection.

Ben W4SC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Charles Johnson-2]

Same exact issue here. The P3 screen also became slow to refresh, like once every 5 seconds. Turn K3 and P3 off/on solved the issue. This only happened after a screen capture.

Charles, K4ZRJ

> On Jul 28, 2016, at 8:02 AM, w4sc <[hidden email]> wrote:
>
> I had this issue also.  The “0” reading appeared after making and saving a couple of screen captures.  Recycling the power on the P3 did not correct.  Closing the “COMM PORT” and reopening did correct it.  I have had other issues with this connection to the P3 through the K3S USB connection.
>
> Ben W4SC
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]